Installing a Brick Paver Walkway or Interlocking Brick Machine

The use of Setting up a Brick Paver Walkway or Clay Bricks or Pavers to develop a sidewalk or patio complements a house in a method that is unequaled. It adds a level of quality and sophistication to a home entrance that can not be attained with either concrete or asphalt. Brick and Pavers also can be found in various colors and shapes allowing for unique color design and patterns to be accomplished. In addition, setting up a Brick or Paver sidewalk does not always need a pro. With some fundamental knowledge and a reasonably simple sidewalk plan, a homeowner is capable of undertaking such a task.

The key to setting up a Brick or Paver Walkway is to first properly prepare the location where the bricks/pavers are to be set up. In addition, string lines need to be strung on each side of the pathway.
Once the location has actually been dug, 3/4" gravel stone ought to be laid in and tamped down securely. 2" of sand, or stone dust ought to be spread over the gravel. Again the sand/stone dust should be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline must equate to the density of the brick or paver.

Now that you have a stable base, position a 1" pipeline or ledger board the length of the sidewalk on either side of the pathway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will develop a level surface location to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the ready location. These strips will serve as your sidewalk border and help to preserve the integrity and shape of the sidewalk. You can get these plastic strip borders at the majority of home enhancement shops. The strips ought to be anchored down with 12" galvinized nails. You must sink these nails into more info the ground and through the strips every foot.

As soon as this is done, you can then start to lay the bricks/pavers. There are many patterns you can lay. I especially like the Herring Bone pattern. The key to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again help maintain the integrity of the walkway.

Inevitably bricks/pavers will require to be cut or divided when constructing the walkway. To in fact cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the spot where you desire to break the brick. If your walkway has curves you will require to buy/rent a wetsaw.

After installing the bricks, construct up the outside edges with extra sand, and after that shovel in the topsoil and pack down securely.
Spread stone dust over the new walkway and sweep into the fractures. This will finish the interlocking of the bricks and help to eliminate any weed growth.

In addition, installing a Brick or Paver get more info pathway does not necessarily need a pro. The key to installing a Brick or Paver Walkway is to very first appropriately prepare the area where the bricks/pavers are to be installed. Now that you have a stable base, place a 1" pipeline or ledger board the length of the sidewalk on either side of the pathway. These strips will act as your walkway border and help to maintain the stability and shape of the pathway. Undoubtedly bricks/pavers will need to be cut or split when building the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *